Carpet surface runway mats. Carpet surface on a 30mm foam base. Ideal for gymnastics activities. Can be attached with VELCRO® Fasteners to create exercise areas
Tribond carpet surface matting rolls are ideal for a huge number of applications.
This matting forms the top surface of Continental's FIG approved artistic sprung gymnastic floor area. Tribond is ideal for use as runway matting, or when rolls are placed side-by-side to create a practice gymnastic or cheerleading floor area.
Tribond is manufactured from 5mm of polypropylene gymnastic quality carpet heat bonded to a 30mm thick 3-layer laminate of Tribond foam.
No glues are used in the manufacture of this matting and the rolls therefore cannot de-laminate.
The matting is 2m wide and available in any length up to 30m. If special sizes or shapes are required, the material can be cut to shape and size with a sharp Stanley knife and the cut edges need no special treatment and will not fray or delaminate. As the material is rolled during manufacture, shorter lighter sections may not have enough weight to flatten out that curved shape. We therefore recommend 6m lengths and above unless you are gluing the Tribond to your floor. To purchase sections less than 6m long, please contact us.
Available in a choice of five colours from stock:
 |
 |
 |
|
Seal Grey |
Lilleshall Blue |
Purple |
 |
 |
|
|
Charcoal |
Jade Green |
|
Other colours available by special arrangement and possibly subject to minimum order charges - you can see the complete Tribond colour range here - please call us to discuss your requirements and availability
If you intend to create a floor area, please select the number of 2m wide rolls of your required length (e.g. to create a 14m x 14m area you will require 7 x 14m rolls). Velcro to join the rolls must be ordered separately at additional cost - please click on the accessories tab above.
If you intend to move large Tribond rolls regularly - for example to and from storage in a sports hall - then please consider our carpet roll dollies which are ideal for that purpose.
PLEASE NOTE: This material (like all foam materials) can expand and shrink depending on temperature. Therefore there is a small unavoidable manufacturing tolerance of up to approximately 0.5% (normally much less) in the length of the rolls. This means a roll of 10m in length may be +/- 50mm. Therefore if you require the material to fit exactly into a recess or between two walls or similar, then much as is normal practice when purchasing carpet, we recommend purchasing a longer roll and trimming it to the exact length on site.
